How to Use a Roof Ladder at Work

how to use a roof ladder

Working at heights is dangerous. Using the right equipment is vital to staying safe. Roof ladders are made to give you stability and support on sloped surfaces. Whether you’re doing maintenance, repairs or installations, knowing how to use a roof ladder properly can prevent accidents and injuries.

This guide will explain how to use a roof ladder safely. It’s aimed at workers and provides clear instructions and safety tips. You’ll also learn about the UK laws that govern roof work, so you know the rules you and your employer must follow.

Safety Regulations

When working with roof ladders, it’s important to know the regulations that keep you safe. In the UK, two main sets of regulations apply: the Work at Height Regulations 2005 (WAH) and the Provision and Use of Work Equipment Regulations 1998 (PUWER).

Work at Height Regulations (WAH)

The Work at Height Regulations are designed to prevent falls and injuries. Under these regulations, employers must ensure all work at height has been risk assessed and made safe. Employers must also:

  • Use ladders only when there are no safer methods of working at height.
  • Ensure the work is planned and carried out by competent workers.
  • Provide the right (i.e. safe) equipment for the job.
  • Provide training and instructions to workers.

Workers also have duties under WAH. You must:

  • Follow the instructions and training provided.
  • Report any hazards or equipment issues to your employer.
  • Check equipment before using it.
  • Use all equipment correctly.

Ladder Inspection Training

Our Ladder Inspection Training teaches participants how to conduct thorough and effective ladder inspections. It looks at the legal requirements, common faults, steps to inspections and actions to take if a ladder is found unsuitable or unfit for use.

Provision and Use of Work Equipment Regulations (PUWER)

PUWER rules ensure that all work equipment, including ladders, is safe to use. They require that:

  • Employers provide suitable work equipment and relevant training.
  • Employees use the equipment correctly.
  • Regular checks and maintenance are carried out to keep equipment in good condition.

Before using any ladder, you must be sure all of these conditions have been met. If you don’t think a roof ladder is right for the task or doubt the ladder you’re using is safe, postpone the work until these issues have been resolved.

puwer and ladder use

Competence

Before we cover the specifics, it’s crucial to note that workers must be competent to use a ladder of any type, from step to suspended ladders.

Competence requires knowledge, hands-on experience and proper training. While these instructions will help you set up a roof ladder, they’re not enough on their own to ensure complete safety. Make sure you have adequate experience or are working under the supervision of someone competent.

How to Use a Roof Ladder

A roof ladder is a type of ladder that hooks over the ridge of a pitched roof. It has wheels at the top to help you position it without damaging the roof tiles. Once in place, the hooks keep it secure so you can work safely.

falling from roof edges

Key Components of a Roof Ladder

  • Ridge Hook: This secures the ladder to the roof ridge.
  • Wheels: These help you move the ladder into position without causing damage.
  • Rungs: These are the steps you climb. They should be non-slip to prevent falls.
  • Stiles/Side Rails: These provide the structure and support for the ladder.

Roof ladders are designed solely for work on roofs with a pitch angle between 25 and 65 degrees. You also can’t use roof ladders to replace a step or leaning ladder.

Preparing for Roof Work

Before you start the work, refer to the risk assessment. It’s also essential to perform your own checks of the area and equipment for any hazards.

Choosing the Right Ladder

Your employer must provide equipment suitable for the task, as required by PUWER. The roof ladder should be in good working order, long enough for the roof and durable enough to support your weight and any equipment. Roof ladders should comply with the relevant British Standard.

Referring to the Risk Assessment

A competent person should have conducted a risk assessment before roof work begins. Make sure you review it and follow the control measures.

You should also assess the work yourself. Conditions on the day might have changed, or something might have been missed.

Using Personal Protective Equipment (PPE)

Maintaining three points of contact on a roof ladder can be challenging, so safety harnesses are strongly advised. Along with harnesses, standard gear such as helmets and gloves are essential. The risk assessment will determine what PPE is necessary to keep you safe.

If PPE is required, your employer must provide it free of charge, in good condition and with adequate training on its use. These are all legal requirements under the Personal Protective Equipment at Work Regulations 2022.

Checking the Roof Ladder is in Good Condition

Before using the ladder, you must know it has been recently examined by a competent person. A record of this inspection should prove it’s in a safe condition.

You must also conduct your own pre-use check:

  • Look for Damage: Scan for cracks, bends or other signs of wear and tear.
  • Check Stability: Make sure the ladder feels stable and secure when set up on the ground.
  • Test the Hooks and Wheels: Ensure the hooks are not bent and the wheels turn freely without resistance.

How to Use a Roof Ladder

You’ll need two ladders: a leaning ladder to reach the roof and a roof ladder to work on the roof itself. Follow these steps to ensure both ladders are securely positioned and ready for use.

Setting Up the Leaning Ladder

  1. Ensure It’s Tall Enough: The top three rungs of the leaning ladder should clear the roof’s edge. This added height will make transferring between the two ladders easier and safer.
  2. Find a Stable Surface: Place the leaning ladder on a flat, stable surface. Ensure the ground is firm and level to prevent the ladder from slipping.
  3. Angle the Leaning Ladder Correctly: Follow the 1-in-4 rule: for every 4 units of height, place the base 1 unit out from the wall.
  4. Secure the Leaning Ladder: Tie the leaning ladder to a secure anchor point or use an anti-slip device.

Setting Up the Roof Ladder

  1. Extend the Roof Ladder: On the ground, extend the roof ladder to its full length.
  2. Position the Wheels: Place the wheels on the roof surface and carefully roll the ladder towards the ridge.
  3. Secure the Hooks: Once the ladder is in place, flip it so the hooks catch the ridge of the roof.

Securing the Roof Ladder

  1. Check Stability: Make sure the roof ladder feels stable and secure before climbing.
  2. Use Additional Safety Measures: Use suitable safety measures such as tie-off straps or anchors to secure the ladder further.

Transferring from the Leaning Ladder to the Roof Ladder

  1. Climb the Leaning Ladder: Carefully climb the leaning ladder, maintaining three points of contact.
  2. Transition to the Roof Ladder: At the top, carefully transfer from the leaning ladder to the roof ladder. Ensure you have a firm grip on the roof ladder before fully transferring your weight.

Working from the Roof Ladder

  1. Climbing Technique: Place your hands and feet on the rungs when climbing up or down the ladder. Do not grip the stiles. Also, avoid standing on the roof surface.
  2. Descending Safely: Maintain three points of contact and crawl backwards when coming down.
  3. Stay Between the Stiles: Never reach out from between the stiles, as this may cause the ladder to become unstable.
  4. Hands-Free Climbing: Wear a tool belt to keep your hands free, and do not overload the ladder with tools or materials.

Taking Down the Roof Ladder

Taking down the roof ladder reverses the steps used to set it up.

  1. Crawl Backwards Down the Roof Ladder: Maintain three points of contact as you crawl backwards, gripping the rungs with your hands.
  2. Transfer to the Leaning Ladder: Once at the bottom of the roof ladder, carefully transfer back to the leaning ladder, ensuring a firm grip.
  3. Unhook the Roof Ladder: Unhook the roof ladder from the ridge and flip it over so the wheels are in contact with the roof.

Key Takeaways

  • Comply with the Work at Height Regulations (WAH) and the Provision and Use of Work Equipment Regulations (PUWER) to ensure safety and compliance.
  • Competence is crucial. Ensure you have the necessary knowledge, experience and training to use a roof ladder safely.
  • Wear appropriate personal protective equipment as determined by the risk assessment. Safety harnesses can prevent falling from roof edges.
  • Climb and work on the roof ladder using the correct techniques. Maintain three points of contact, grip the rungs and avoid overreaching.

Ladder Inspection Training

Knowing how to use a roof ladder safely is crucial, but it’s only part of staying safe. It’s equally important to ensure that your equipment has been inspected and confirmed as suitable.

Our Ladder Inspection Training course provides the knowledge and skills to properly inspect ladders and confirm they’re safe for use.

Through this course, you’ll learn to:

  • Identify potential hazards and defects in ladders.
  • Conduct thorough inspections in line with PUWER requirements.
  • Confirm that your ladders are suitable and safe.

Good technique and well-maintained equipment go hand in hand for safe roof work. Improve safety and compliance by enrolling in our Ladder Inspection Training course today.

About the author(s)

Authors Photo

Jonathan Goby

Share with others
You might also like